Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 492 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1350: Cannot able to read multiple bytes using btool with simple ble peripheral example of cc1350 .

manoj sai
Expert 2305 points
Part Number: CC1350
Other Parts Discussed in Thread: BLE-STACK

Hello Everyone,

I had taken Example code of simple peripheral in Simplelink_cc1350_1_50_00_08 .

Iam not able to read multiple bytes in Btool , but iam  able to read single byte in btool .

Note:  iam also not able to write multiple bytes in B-tool. 

  • 0
    TI__Guru* 77791 points
    Hi Manoj,

    According to the error message, you need to do an authentication(pairing/bonding) before you can interact with that characteristic. You can read more about the authentication process in the BLE-Stack User's Guide.

    (Alternatively, you can change the properties of the characteristic in the simple_peripheral example.)