RTOS/CC2650: regarding to store data

You can refer to sunmaysky.blogspot.tw/.../how-to-create-new-task-in-ti-rtos-to.html

i am using IAR tool, in that their is no project zero

The step is similar to IAR and other BLE Stack example.

should i have to remove NO_OSAL_SNV in stack

Yes, you have to remove NO_OSAL_SNV and define OSAL_SNV=1 or 2.

if i use OSAL_SNV =1 or 2 i am getting this type of error
Error[Lp011]: section placement failed

unable to allocate space for sections/blocks with a total estimated minimum size of 0xeb89 bytes (max align 0x4) in <[0x00010000-0x0001efff]> (total uncommitted space 0xcfd0).
Error while running Linker

Which BLE example do you use as a base? It seems there’s not enough RAM/Flash size for SNV implementation.

cc2650 sensor tag , so then how can i store data

What do you set OSAL_SNV? 1 or 2?

both i tried , same error plz help

I remember I had tested SNV with original SensorTag example and it works. Do you try it with original SensorTag example?

Have you tried Yikai's suggestion? That should give you more space to store data. If you have no problem regarding this issue, I will close this thread.