CCS/CC2640R2F: CC2640R2F

MY MY

Part Number: CC2640R2F

Tool/software: Code Composer Studio

Hello every body,

How can i start and stop advertising with simple peripheral (cc2640r2f) on code composer studio ?

Thanks You

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735685 points

I suppose you can use the following codes to disable advertising

uint8_t initialAdvertEnable = FALSE;
GAPRole_SetParameter(GAPROLE_ADVERT_ENABLE, sizeof(uint8_t), &initialAdvertEnable ) ;

The following code to enable advertising

uint8_t initialAdvertEnable = TRUE;
GAPRole_SetParameter(GAPROLE_ADVERT_ENABLE, sizeof(uint8_t), &initialAdvertEnable ) ;

0 MY MY over 7 years ago in reply to YiKai Chen

Expert 1055 points

Hello,

Thanks you, but i would to enable advertising and disable advertising every 2 minutes.

For exemple, in the beginning, there is not advertising (disable), then after 2 minutes, i enable advertising

Thanks you

0 YiKai Chen over 7 years ago in reply to MY MY

Guru 735685 points

You can create a periodic event to do this.

0 MY MY over 7 years ago in reply to YiKai Chen

Expert 1055 points

hello,

how i can do this periodic event ?

0 YiKai Chen over 7 years ago in reply to MY MY

Guru 735685 points

You can refer to SBP_PERIODIC_EVT_PERIOD implementation in simple_peripheral example.

0 MY MY over 7 years ago in reply to YiKai Chen

Expert 1055 points

Hello,

I look this, but i don't known to do this ?

Please Help Me

0 YiKai Chen over 7 years ago in reply to MY MY

Guru 735685 points

I suggest you to try it and post a solid question so I know how to help you.

0 MY MY over 7 years ago in reply to YiKai Chen

Expert 1055 points

i would to enable advertising and disable advertising every 2 minutes.

For exemple, in the beginning, there is not advertising (disable), then after 2 minutes, i enable advertising.

I have to create 2 tasks, one goes advertising (enable...True) , the other goes off advertising (disable....False)

0 YiKai Chen over 7 years ago in reply to MY MY

Guru 735685 points

I already suggest you to create a periodic event to do this. Have you created the periodic event successfully?

0 MY MY over 7 years ago in reply to YiKai Chen

Expert 1055 points

No, I don't create a periodic event, I'm trying to do that but I do not know how to do it.

0 YiKai Chen over 7 years ago in reply to MY MY

Guru 735685 points

At least, you can search SBP_PERIODIC_EVT_PERIOD related codes in simple_peripheral and try to copy them to run in your project.

Bluetooth®︎

Bluetooth forum

CCS/CC2640R2F: CC2640R2F