CC2541: Fixed Frequency - How to for compliance testing

Crystal Young

Part Number: CC2541

I am looking for guidance on how to modify the firmware or hardware of the CC2541 micro to fix the frequency for compliance test purposes.

TI applications engineer and TI wiki have been unhelpful.

Looking for someone to advise exactly what to do, or has submitted a finished good with the CC2541 micro to both FCC/IC and RED compliance testing.

Please help.

over 8 years ago

0 PM over 8 years ago

TI__Mastermind 27145 points

Hi,

You can use SmartRF Studio and generate Register Settings with Continuous Tx Modulated and Unmodulated modes at the desired channel and use it in your code. Just replace the Reg settings with these new settings.

Thanks,
PM

0 Fredrik K over 8 years ago

TI__Guru** 106705 points

Hi,

Refer to the "How to Certify your Bluetooth Product" wiki article here: processors.wiki.ti.com/.../How_to_Certify_your_Bluetooth_product

It also references a code example here: processors.wiki.ti.com/.../FCC_ETSI_Test

Cheers,
Fredrik

Bluetooth®︎

Bluetooth forum

CC2541: Fixed Frequency - How to for compliance testing