RTOS/CC2650: Want to combine UART to simple pheripheral example code

kyungin nam

Intellectual 490 points

Part Number: CC2650
Other Parts Discussed in Thread: CC1350

Tool/software: TI-RTOS

I am using CC2650 launchpad with simple BLE pheripheral example code.

I want to combine this to UART to send data from uart to bluetooth (To see data via BLE tracker application).

Can I have any suggestion or any advice?

over 7 years ago

0 Eirik V over 7 years ago

TI__Guru 56590 points

Hello,
Please have a look at this thread:
e2e.ti.com/.../1676080

0 Mihai over 7 years ago

Intellectual 500 points

You can try this code, it sends from uart, through ble and then through uart back

4034.uartRxTx_CC1350_LAUNCHXL_TI.zip

0 timeslice over 7 years ago in reply to Mihai

Intellectual 290 points

Hi Mihai,

The OP requested info regarding the CC2650 Launchpad, and I believe you suggested code from the CC1350. Are the two chips compatible? Can I run your attached files from the CC1350 on the CC2650 without modification?

Thanks!

0 kyungin nam over 7 years ago in reply to Eirik V

Intellectual 490 points

Thank you!!

I will consider this forum!

0 kyungin nam over 7 years ago in reply to Mihai

Intellectual 490 points

Thank you!

I will see this code!

0 kyungin nam over 7 years ago

Intellectual 490 points

Have a question Mihai.

I know there should be stack and app parts in a single project.

It doesn't need any stack part?

Also, when I run a code in debug, I think it has some breakpoint in somewhere.

Can you teach me how to use it?

Thank you for your help

0 kyungin nam over 7 years ago

Intellectual 490 points

I am sorry everyone.

I am not solving this problem yet.

I checked the forum and I couldn.t understand.

Also, there is some error with the code.

Please help me!

0 Eirik V over 7 years ago in reply to kyungin nam

TI__Guru 56590 points

Hello kyungin,
Did you read this forum?
processors.wiki.ti.com/.../Cc2640_Adding_a_UART_or_SPI_driver_to_a_Sample_Project

There is also a serial port profile implementation here, although it is a bit more complex.
github.com/.../spp_ble.md

Bluetooth®︎

Bluetooth forum

RTOS/CC2650: Want to combine UART to simple pheripheral example code