• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 52 subscribers
  • Views 344 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640R2F-Q1: Switching between RX and TX in TDMA mode...

Chris Lande
Expert 6545 points
Part Number: CC2640R2F-Q1

Support Team,

Can you help me understand the switching times between Tx and Rx and vice versa in the CC2640R2F-Q1 TDMA mode ?

At the moment I don't see anything less that 1.5ms to reconfigure between Tx and Rx etc.

What sort of number should I be hitting and can you give me any app notes or source code that show it in action ?

Thanks.

  • 0
    TI__Guru* 86071 points
    Hi Chris

    Not sure I know what you are referring to when talking about TDMA mode.

    I have done some measurements when switching between RX and TX on the CC13x0, and I would think that the timing should be about the same for the CC2640R2.

    My measurements are found in this post:

    e2e.ti.com/.../562134

    BR

    Siri