CCS/CC2640R2F: How i can Stop and Start advertising in simple broadcaster

You can use the following API to enable/disable advertising.
uint8_t advertEnabled = TRUE;//or FALSE;
// Enable/Disable connectable advertising.
GAPRole_SetParameter(GAPROLE_ADVERT_ENABLED, sizeof(uint8_t), &advertEnabled);

I want to start and stop advertising, for example 5 minutes of advertising and then stop for 1 minute, then restart advertising.

Thank you

You can create timer event to do it.

How i can do it ?

Thanks

I had suggested you in your another duplicate post at e2e.ti.com/.../684021

Ok
It's this ?


The steps are as the followings:
1. Add "#define SBP_PERIODIC_EVT 0x0004"
2. Add "#define SBP_PERIODIC_EVT_PERIOD 5000" which is how often to perform periodic event (in msec).
3. Claim "static Clock_Struct periodicClock;"
3. Implement SBP_clockHandler
static void SBP_clockHandler(UArg arg)
{
// Store the event.
events |= arg;

// Wake up the application.
Semaphore_post(sem);
}
4. Call "Util_constructClock(&periodicClock, SBP_clockHandler,SBP_PERIODIC_EVT_PERIOD, 0, false, SBP_PERIODIC_EVT);" and "Util_startClock(&periodicClock);" in your application init function like SimpleBLEPeripheral_init.
5. Add SBP_PERIODIC_EVT event processing case in for-loop of application task function like SimpleBLEPeripheral_taskFxn.

if (events & SBP_PERIODIC_EVT)
{
events &= ~SBP_PERIODIC_EVT;

Util_startClock(&periodicClock);

// Perform your application periodic task here!!!
}

Now i use The Simple Broadcaster
are this steps same or no ?

Thanks you

Yes, the steps are the same.

In this part

if (events & SBP_PERIODIC_EVT)
{
events &= ~SBP_PERIODIC_EVT;

Util_startClock(&periodicClock);

// Perform your application periodic task here!!!
}

I add what after // Perform your application periodic task here!!!
no ligne code or i must add ligne of code

Thanks You

What do you mean " ligne of code ?"

What i write after :

// Perform your application periodic task here!!!
...............................
}

or i not write any things

Thanks You

I suppose you should do enable/disable advertising there.

Hey

I mean that if i will write any things or no after this
// Perform your application periodic task here!!!
................................?!!!!
}

Yes, I suppose you need to write something there. Otherwise, why do you create this event?

I would to enable and disable advertising

I had replied you to use the following API to enable/disable advertising.

uint8_t advertEnabled = TRUE;//or FALSE;

// Enable/Disable connectable advertising.

GAPRole_SetParameter(GAPROLE_ADVERT_ENABLED, sizeof(uint8_t), &advertEnabled);

Yes i knew

But i would to advertising for 5 minutes and after i will stop the advertising for 1 minutes,
and after i will re-start the advertising

Yes i knew

But i would to advertising for 5 minutes and after i will stop the advertising for 1 minutes,
and after i will re-start the advertising

I suppose you can change the timer duration in this periodic event to make this 5 minuets- 1 minuet- 5 min- 1 min- ... tempo.

Hey

how i do that ?

I have followed the steps :

1. Add "#define SBP_PERIODIC_EVT 0x0004"
2. Add "#define SBP_PERIODIC_EVT_PERIOD 5000" which is how often to perform periodic event (in msec).
3. Claim "static Clock_Struct periodicClock;"
3. Implement SBP_clockHandler
static void SBP_clockHandler(UArg arg)
{
// Store the event.
events |= arg;

// Wake up the application.
Semaphore_post(sem);
}
4. Call "Util_constructClock(&periodicClock, SBP_clockHandler,SBP_PERIODIC_EVT_PERIOD, 0, false, SBP_PERIODIC_EVT);" and "Util_startClock(&periodicClock);" in your application init function like SimpleBLEPeripheral_init.
5. Add SBP_PERIODIC_EVT event processing case in for-loop of application task function like SimpleBLEPeripheral_taskFxn.

if (events & SBP_PERIODIC_EVT)
{
events &= ~SBP_PERIODIC_EVT;

Util_startClock(&periodicClock);

// Perform your application periodic task here!!!
}

But when i execute Simple_Broadcaster i have this errors :

events is indefined
Semaphore_post is indefined

Thanks You

when i execute Simple_Broadcaster i have this errors :

events is indefined
Semaphore_post is indefined

Thanks You