Hi,
My customer would like to collect RF performance data from the CC2564 while connected to a headset over Bluetooth.
Specifically:
- Rx Power, RSSI, or any measure for incoming signal received by the remote device during audio streaming
- Tx Power to the remote device during audio streaming
- Frequency Information between the CC2564 and remote device (what channel are we on?) during audio streaming
- BER (Bit Error Rate) or any other measure for packet/byte/bit level performance during audio streaming
Are there HCI commands / api functions that we can send to the CC2564 to receive this data?
I found the HCI information on the wiki link here: http://processors.wiki.ti.com/index.php/CC256x_VS_HCI_Commands
Please let me know if there's anything else you'd recommend sharing with the customer.
Thanks,
Chuchen
