CC2650STK: Changing advertising data

Calin Pop

Prodigy 190 points

Part Number: CC2650STK

Hello,

I want to change the advertising data after every transmission so each advertising is different. Is this possible ?

Thanks !

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735685 points

You can change advertising data to apply to next advertising but I don't see TI provides API to allow you to control every adverting.

0 J Lindh over 7 years ago

TI__Guru 57865 points

Hi,
Yes. You can use advertising event callback to trigger an update of advertising data.

0 YiKai Chen over 7 years ago in reply to J Lindh

Guru 735685 points

J Lindh Do you mean there is a advertising event callback every time BLE stack finish sending advertising? If so, can you elaborate where to find this advertising event callback?

0 J Lindh over 7 years ago in reply to YiKai Chen

TI__Guru 57865 points

Hey YK Chen,
Most certainly. The command is HCI_EXT_AdvEventNoticeCmd().

0 J Lindh over 7 years ago in reply to J Lindh

TI__Guru 57865 points

I feel obliged to add that it's not actually a callback per se. It's more of a notification event that can be enabled. Either way, this would be a good place to set new advertising data.

0 YiKai Chen over 7 years ago in reply to J Lindh

Guru 735685 points

Cool! Thanks J Lindh

Bluetooth®︎

Bluetooth forum

CC2650STK: Changing advertising data