CC2650MODA: Upload firmware via UART

Ilya Dubkov

Prodigy 80 points

Part Number: CC2650MODA

Hello!

Can I upload new firmware to CC2650MODA not through JTAG but UART somehow?

Best wishes,

over 7 years ago

0 IUsedToBeARealPerson (M-W) over 7 years ago

TI__Guru 58425 points

Hi Ilya,

Have you looked into the Serial bootloader interface of the device? This would allow you to program it using UART or SPI using some fixed pins.

0 Ilya Dubkov over 7 years ago in reply to IUsedToBeARealPerson (M-W)

Prodigy 80 points

Hi M-W,

I found the mention about it in section 6.6 "Memory" of CC2650MODA Datasheet. Where can I find more detailed information about how to work with this bootloader?

Thank you!

0 IUsedToBeARealPerson (M-W) over 7 years ago in reply to Ilya Dubkov

TI__Guru 58425 points

Hi Ilya,

You can find that in the technical reference manual:

www.ti.com/.../swcu117

0 Ilya Dubkov over 7 years ago in reply to IUsedToBeARealPerson (M-W)

Prodigy 80 points

Hi M-W!

Thank you for the provided link, I've got it!

Thank you for help

Bluetooth®︎

Bluetooth forum

CC2650MODA: Upload firmware via UART