BLE-STACK: The BLE STACK migration from v2.1.1 to v3.0.0

Nomo

Part Number: BLE-STACK

Hello,

I can find the following migration guide for BLE STACK from your website.
dev.ti.com/.../cc2640-to-cc2640r2.html
processors.wiki.ti.com/.../CC2640_Porting_Projects

However, my customers want to migrate their STACK from v2.1.1 to v3.0.0.
Should they migrate their STACK step by step (v2.1.1 -> v2.2.0 -> v2.2.1 -> v3.0.0)?

Best Regards,
Nomo

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735705 points

Try to refer to dev.ti.com/.../cc2640-to-cc2640r2.html

0 Nomo over 8 years ago in reply to YiKai Chen

Guru 16800 points

Hello Yikai-san,

Thank you for your reply.
However, I cannot find the direct migration guide from v2.1.1 to v3.0.0 on the website.

Best Regards,
Nomo

0 YiKai Chen over 8 years ago in reply to Nomo

Guru 735705 points

Try to refer to processors.wiki.ti.com/.../CC2640_Porting_Projects

0 Evan W over 8 years ago in reply to YiKai Chen

TI__Mastermind 41660 points

Please migrate from 2.1.1 to 2.2.1 and then to ble 3.x

There are many pages in that migration docs section of the link that YiKai gave. They should cover most if not all of the versions that you need.

Here specifically is 2.2.1 to ble3.x
dev.ti.com/.../cc2640-to-cc2640r2.html

0 Evan W over 8 years ago in reply to Evan W

TI__Mastermind 41660 points

More generally, these links are a little more well organized and more up to date.

dev.ti.com/.../cc2640-to-cc2640r2.html

dev.ti.com/.../migration.html

0 Nomo over 8 years ago in reply to Evan W

Guru 16800 points

Hi all,

Thank you for your reply.
I'll confirm the information.

Best Regards,
Nomo

Bluetooth®︎

Bluetooth forum

BLE-STACK: The BLE STACK migration from v2.1.1 to v3.0.0