CC2564: Reducing BLE stack size

Nagendra GopalRao

Part Number: CC2564

We are currently using Bluetooth LE stack in TI MSP 430 controller and which is interfaced to CC2564 bluetooth controller. We want to have simple application of transmitting sensor data over bluetooth whenever request comes from other bluetooth devices like PC or Mobile. We want to reduce stack size by including only required modules/profiles to libraries. Which are the minimum required modules to be included for this application.

over 7 years ago

0 Hari Nagalla over 7 years ago

TI__Mastermind 27080 points

Hi,

Please, take a look at the "Using Flexible Build Library.pdf" document in the MSP430 Blutopia SDK Documentation folder.. It provides some options to reduce the library size..

Thanks

0 Nagendra GopalRao over 7 years ago in reply to Hari Nagalla

Prodigy 20 points

yes. I have seen the documents. But for our simple application, i need to know the components to include in library like SPP Server, SDP Server, LE Master, LE Slave, GATT Server etc. and also would like to know difference between LE Master ,Standard HCI etc. What are the minimum libraries required to build simple application as mentioned earlier. Any help would be appreciated as finding difficult to understand .
Thanks And Regards

0 Hari Nagalla over 7 years ago in reply to Nagendra GopalRao

TI__Mastermind 27080 points

Hi Nagendra,
If, you are using only LE features, you do not need SCO, PP, HID classic profiles. Try removing them and give it a try..

Thanks

Bluetooth®︎

Bluetooth forum

CC2564: Reducing BLE stack size