RTOS/CC1352R: How to implement ota concept in cc1352 using internal flash?

manoj sai

Expert 2305 points

Part Number: CC1352R

Tool/software: TI-RTOS

How to implement ota concept in cc1352 using internal flash?.

where to store the new firmware in cc1352 ?

over 7 years ago

0 AB over 7 years ago

TI__Mastermind 23636 points

HEllo MAnoj,

We have examples which do this already that you can check out here:

OTA 15.4 Stack and flash: dev.ti.com/.../

OTA using EasyLink and flash: dev.ti.com/.../

OffChip BIM (Boot Image Manager): dev.ti.com/.../

Regadrs,
AB

0 manoj sai over 7 years ago in reply to AB

Expert 2305 points

Thanks AB for response.

can we store new firmware in the internal flash and transfer into rom to upgrade new firmware.

0 manoj sai over 7 years ago in reply to manoj sai

Expert 2305 points

i didnt find reference example code using internal flash for ota for CC1352 model.

0 manoj sai over 7 years ago in reply to manoj sai

Expert 2305 points

our task is to store hex file form external device through uart and store it in internal flash of cc1352 . and next step is upgrade this new hex file to cc1352 and to be erased previous code .

please help , what are the steps required for this task ?

0 AB over 6 years ago in reply to manoj sai

TI__Mastermind 23636 points

Hello,

Yes, if you follow the BIM example link I sent you. You will see the implementation for this specific use case.

Bluetooth®︎

Bluetooth forum

RTOS/CC1352R: How to implement ota concept in cc1352 using internal flash?