CC2541: Connection for the first time

Thank you brother

I have CC degubber and also downloaded BLE stack 1.4.2 can you guide me how can I use it with IAR embedded workbench? I am new to it.

Thanking you

dear yikai Chen i installed BLE stack 1.4.2. inside i found Btool and how can i use it?

Yes i understood how to connect to the board and debug the sample program.
1.Where can i Check my results of transmitted data in the app.
2.Where do i find the app for collecting data and also
3. how can i create a mesh of multiple cc2541 (transmitters)to single app (receiver)and monitoring data of all transmitter at a time

Thank you Yikai chen

I found the solutions for 1 & 2 and i will work on 3rd question and keep in touch with you if need any information.

Evan Wakefield,

My target is to make a bidirectional connection between multiple CC2541 transceivers and a single receiver(mobile app) but not any connection among CC2541. Is it possible?

thanking you

This will depends on your Smartphone. If BLE on your SmartPhone allows muliple peripherals connected to the same app, it should be OK.

Yikai chen

Thank you for your reply. It seems that it totally depends on the mobile application to accept the connections and displays all the transmitted information at a time.

hey Yikai chen

May i know what is the output of simpleBLEperipheral.c ?

I couldn’t understand your question. What do you mean the output of simpleBLEperipheral.c?

simpleBLEperipheral.c is one of the example project for cc2541 from BLE stack 2.4.1 where you advice me to download . I could not understand the exact code as it consisting a lot of functions, events, GAP, GATT parameters etc

Try to refer to dev.ti.com/.../