CC2640R2F: multi role connection Parameter update

DAVID CUI

Part Number: CC2640R2F
Other Parts Discussed in Thread: LAUNCHXL-CC2650, CC2650

dear all:

I am using the multi role program as a base for my program, on LaunchXL-CC2650 units, Protocol stack version:simplelink_cc2640r2_sdk_2_30_00_28.

As a slave device, what functions can call to initiate a connection Parameter update to the master device?

over 7 years ago

0 Evan W over 7 years ago

TI__Mastermind 41110 points

Hi,

The LaunchXL-CC2650 is not supported by the simplelink CC2640R2 SDK. CC2650 runs the BLE Stack 2.2.2. Only CC2640R2 devices can use the simplelink CC2640R2 SDK.

For the CC2640R2 please read to update connection parameters: dev.ti.com/.../gap.html

0 DAVID CUI over 7 years ago in reply to Evan W

Intellectual 610 points

dear evan:
I use multi-role and initiate a connection with the phone, As peripherals ,How to initialize a Parameter update command? thanks!

0 Evan W over 7 years ago in reply to DAVID CUI

TI__Mastermind 41110 points

Hi,

Please read this section: dev.ti.com/.../gaprole.html

Bluetooth®︎

Bluetooth forum

CC2640R2F: multi role connection Parameter update