RTOS/LAUNCHXL-CC2650: Bluetooth Softwrae

Hi Babu,

There is not much details in your post to work off of.

What do you mean by "not working"? How did you test the system?

Did you read the SW Developer´s Guide and followed the instructions? Did you for example build and download the Stack project before downloading the App project?

Regards,
Fredrik

I am marking this thread as resolved due to lack of response.

Hi Fredrik,

Thank you for your response. I have build App project and stack project for simple peripheral from CCS, and loaded the hex files into launchpad through uniflash. After loading the hex files it is advertising with "simpleBLEperioheral" name in the sensortag App(Android). I am able to pair with the device using passcode:"000000".

After this i have no idea, how to test it further. i have gone through following link. "

From above link, i am able to find one service called "null service" with 5 characteristics. But i am unable get any thing in putty (serial terminal). Please suggest how to proceed further.

I need more details on simpleBLEperipheral project, what exactly it does/usage and how test etc...

Please let me know if you need any details.

Sorry for the delay, i am on festival vacation till 20.01.2019.

Sorry for the delay, i am on festival vacation till 20.01.2019.

Hi Babu,

Have you read the actual documentation that comes with the BLE Stack?

Are you sure your UART terminal is configured correctly?

Hi Fredrik,

I did not find any document related to simpleBLEperipheral, in the ble stak which i downloaded. So i gone through the web and same link is given.

I am sure that i have configured the terminal as required.

 If you can share me any documents related to this, i can go through and give you feedback.

Babu.

The Software Developer´s Guide, which comes with the BLE Stack, can also be found here: www.ti.com/.../swru393

Example applications are described in chapter 12.

HI fredrik,

I have gone through the document but there are much details on simple peripheral usage.

Please suggest me how to proceed further.

Thanks,

Babu.

HI fredrik,

I have gone through the document but there are much details on simple peripheral usage.

Please suggest me how to proceed further.

Thanks,

Babu.

Hi Babu,

It is still not clear what your problem is. I have also pointed to the relevant documentation for the BLE Stack and SimplePeripheral. I am not sure what else I can do to help you.

Regards,
Fredrik