CCS/LAUNCHXL-CC2640R2: Launchpad dump flash and restore

Andrew Coad

Expert 1625 points

Part Number: LAUNCHXL-CC2640R2

Tool/software: Code Composer Studio

Hi,

Not sure if this should be in the CCS forum or here...

Is there a way to dump the flash contents from a brand new LaunchPad-CC2640R2 and restore it later?

Why do I wan to do this? For a workshop, I need to test each Launchpad with custom software but, going into the workshop, I would like to restore it back to original factory condition.

Kind regards,

over 7 years ago

0 Marie H over 7 years ago

TI__Guru* 83901 points

Hi Andrew,

You can use Flash Programmer 2 (link: www.ti.com/.../flash-programmer ) to read the CC2640R2 flash. (Open the edit tab.)

The Launchpad has a version of the Project Zero preprogrammed. If you want to re-program this, you can use the project zero hefile found in the examples\rtos\CC2640R2_LAUNCHXL\blestack\hexfiles folder.

0 Andrew Coad over 7 years ago in reply to Marie H

Expert 1625 points

Got it. Many thanks.
ac

Bluetooth®︎

Bluetooth forum

CCS/LAUNCHXL-CC2640R2: Launchpad dump flash and restore