RTOS/LAUNCHXL-CC2640R2: How to set the simple_serial_socket_client firmware to accept only direct advertising connections

Hi Andre,
That should be possible, as long as the central device is setup such.

Hello, thanks for your reply.


I am running here the simple serial socket application over cc2640.


I need to use in my application the client (central) as a receiver for direct advertisement from a mobile device (peripheral sending direct advertisement).


I have ...

my application
Central (simple serial socket client - central side)

mobile application
Peripheral (simple serial socket client - peripheral side)



How Do I need to adjust the default firmware (central) to work in this way?

Thanks a lot.