CC2650MODA: CC2650MODA

Arathi M

Part Number: CC2650MODA

I have a setup of CC2650MODA connected to XDS110 debugger. and i m running a sample application simple_peripheral on that. when in debug mode with XDS110 connected everything seems to be working fine. but when i remove debugger and restart, the application is not running.

Please let me know how to resolve this issue?

Thanks in advance

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735695 points

Does your example running on CC2650MODA support OAD? If yes, make sure you download BIM into your CC2650MODA to make it run without Debugger.

0 Arathi M over 7 years ago in reply to YiKai Chen

Intellectual 330 points

I m running simple_peripheral example, don't think it has OAD support. Also can you please share the details where to find BIM package and how to load that?

0 YiKai Chen over 7 years ago in reply to Arathi M

Guru 735695 points

simple_periphera doesn’t enable OAD and it doesn’t make sense not working without Debugger. Do you power the module well?

0 Arathi M over 7 years ago in reply to YiKai Chen

Intellectual 330 points

yes.. it is powered properly.

but still what do you mean by power well?

Is there any other reason for this to happen?

0 YiKai Chen over 7 years ago in reply to Arathi M

Guru 735695 points

If everthing works fine with XDS110 connected, I see no reason why it doen't work without CDS110 connected and you are sure it is powered properly. Run out of idea...

0 FI over 7 years ago in reply to Arathi M

TI__Mastermind 21530 points

Hi Arathi,
Were you able to resolve the issue?
I will go ahead and close this thread for now. If you are still having an issue, feel free to re-open the thread. If the thread is locked you can always enter another issue and refer to the this thread.
Thanks,

Bluetooth®︎

Bluetooth forum

CC2650MODA: CC2650MODA