CC2640: Not able to discover the CC2640 over the air

Hi Pacithra,

The BLE Stack is pre-qualified, there is no need for you do these tests. More information about Bluetooth qualification can be found here: ti.com/ble-qualification

Regards,
Fredrik

Hi Fredrik,
The Test Errata E10734 become mandatory. So two new test cases SM/SLA/KDU/BI-01 and  SM/MAS/KDU/BI-01 are added.Referenced QDID- 82185 is qualified before the errata become mandatory. Can you please provide evidence for SM/SLA/KDU/BI-01 and  SM/MAS/KDU/BI-01 test cases.

Regards,
Pavithra

Hi Pavithra,

See this thread: e2e.ti.com/.../744159

Regards,
Fredrik

Hi Fredrik,

We have already made corresponding changes. But as the changes lead to entry of two SM test cases: SM/SLA/KDU/BI-01 and  SM/MAS/KDU/BI-01 , please provide the validated evidence to keep in the compliance folder.

Regards,
Pavithra

Hi Fredrik,

We need evidence for these two SM test cases

SM/SLA/KDU/BI-01 and  SM/MAS/KDU/BI-01

As this is mandatory test cases once the errata changes are being done on the .bls file.

While submitting the results, we are in need of the evidence for these two test cases if these are pre-qualified.

Regards,
Praveen Raaj P.

Hi Praveen,

I am looking into this.

Regards,
Fredrik

Hi Fredrik,

A gentle remainder to the above thread.

we are in need of the evidence for SM/SLA/KDU/BI-01 and  SM/MAS/KDU/BI-01 test cases if these cases are pre-qualified.

Regards,
Pavithra

Hi Pavithra,

I just pinged our R&D guys about this again. They are working with our BQC to figure this out.

Regards,
Fredrik

Hi Fredrik,

Thank you for the update.

We have checked with Bluetooth SIG and SIG asked to submit the test evidence for the two new SM test cases.

New PICS “SUM ICS 34/13 and 21/17” are enabled to resolve inconsistency arrived due to core errata 10734.  

The two SM test cases are enabled because of PICS combination ( SM 1/1 AND SM 2/5 AND SUM ICS 34/13).

 

Regards,

Pavithra

Hello Fredrik,

A gentle reminder on the above thread.

Meanwhile i have tried running the two SM test cases where i observed the following,

We were able to get BD_ADDR from BTool which TI provided,

For SM/MAS/KDU/BI-01-C test case GATT connection Initiation happened but Pairing feature exchange failed. Please let us how to proceed after this.

For SM/SLA/KDU/BI-01-C test case the IUT is not accepting GATT Connection request from PTS. Please let us know how to put IUT in Connectable mode.

If you have any suggestions, please let me know.

Regards,

Praveen Raaj P.

Hi Praveen,

I appologize for the waiting time. I just heard back from R&D that we should be able to provide test evidence for this test cases shortly.

Regards,
Fredrik

Hi,

Please see attached test evidence for SM/SLA/KDU/BI-01-C and SM/MAS/KDU/BI-01-C. Sorry for the delay.

SM.MAS.KDU.BI-01.zipSM.SLA.KDU.BI-01.zip

Hi,

How are the tests performed? Are they tested using another Bluetooth sample? Can you please provide more details about the test setup so that we can mention same during evidence submission to Bluetooth SIG?

Regards,
Pavithra V

Hi,

Did the test performed with PTS Software ? Can you please share the PTS logs ?

Regards,
Pavithra