CC2650STK: Device is switched of if no connection is there.

Yadnesh Patil

Part Number: CC2650STK
Other Parts Discussed in Thread: BLE-STACK

The device is getting switched off if no connection is there with a device.
I want to keep it running until manually switched off. Is there any such option available?

over 6 years ago

0 J Lindh over 6 years ago

TI__Guru 57865 points

Hi Yadnesh,
Do you mean you want the CC2650STK to advertise indefinitely (until manually disabled).

0 Marie H over 6 years ago

TI__Guru* 81321 points

Hi Yadnesh,

Please see this thread: e2e.ti.com/.../2450280

0 Yadnesh Patil over 6 years ago in reply to J Lindh

Prodigy 50 points

Yes Joakim

0 Yadnesh Patil over 6 years ago in reply to Marie H

Prodigy 50 points

Can you please explain the process of updating/compile source code at device level inorder to update the value of DEFAULT_DISCOVERABLE_MODE from GAP_ADTYPE_FLAGS_LIMITED to GAP_ADTYPE_FLAGS_GENERAL .
Where to get the source code file.

0 Marie H over 6 years ago in reply to Yadnesh Patil

TI__Guru* 81321 points

Hi Yadnesh,

You need to download the BLE-STACK-2-2-2 locally, link: www.ti.com/.../BLE-STACK

Please see the BLE-Stack User's Guide for instructions on compiling projects: http://www.ti.com/lit/swru393

Bluetooth®︎

Bluetooth forum

CC2650STK: Device is switched of if no connection is there.