RTOS/LAUNCHXL-CC26X2R1: CC26x2 does not restart after successful OAD

Leoni Mota Loris

Tool/software: TI-RTOS

CC26x2 Device does not restart after successful OAD

* SDK: simplelink_cc13x2_26x2_sdk_2_40_00_81

I know that this is a known issue (as shown here), but I wanted to know if you guys have an estimation of a SDK release in which this bug would be solved.

Or even, a workaround.

Cheers.

over 6 years ago

0 J Lindh over 6 years ago

TI__Guru 57865 points

Hi Leoni,
The only workaround as of now is what is provided in the link you refer to; "Unplug/replug or hard reset will fix this and the device will boot ok"

0 Leoni Mota Loris over 6 years ago in reply to J Lindh

Expert 1225 points

Yes, so,

Will there be a sdk in which this is fixed? When will it be released?

0 J Lindh over 6 years ago in reply to Leoni Mota Loris

TI__Guru 57865 points

Hi Leoni,
I am currently investigating this. I'll get back to you as soon as I get confirmation.

0 J Lindh over 6 years ago in reply to Leoni Mota Loris

TI__Guru 57865 points

Hi Leoni,
I just heard back from the tools team and this is related to the emupack part of CCS/IAR IDEs. The issue should already be fixed and available as you update to a newer release with the next SDK version.

0 Leoni Mota Loris over 6 years ago in reply to J Lindh

Expert 1225 points

Alright, Thanks Lindh!
But, this means a new sdk will be released soon, right?

0 J Lindh over 6 years ago in reply to Leoni Mota Loris

TI__Guru 57865 points

Hi Leoni,
Yes, we release new SDKs on a quarterly basis, next availability targeting end of March. I suggest you make use of the "Alert Me" feature on www.ti.com/.../simplelink-cc13x2-26x2-sdk

Bluetooth®︎

Bluetooth forum

RTOS/LAUNCHXL-CC26X2R1: CC26x2 does not restart after successful OAD