• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 258 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC2640R2: Broadcasting AoA tone packets as advertising packets, SDK 2.40

GOHM ELECTRONICS
Expert 2085 points
Part Number: LAUNCHXL-CC2640R2


Hi all,

We want to broadcast AoA tone packets as advertising packets without any connection established. Is it possible in SDK 2.40? If not, is it possible in SDK 2.30?

Regards

  • 0
    TI__Guru 57865 points
    Hi,
    It is possible in the SDK v.2.30. Please note that the specific implementation deviates from the BT5.1 AoA solution and is therefore not supported on SDKv2.40 and later releases. In SDK v.2.40 we introduced the AoA CTE tone at the end of the connection packet instead.