CCS/CC1352R: Merging BIM and Persistent application with OAD profile

Vyacheslav Lebets

Part Number: CC1352R

Tool/software: Code Composer Studio

Hi All.

I have a simple question: is it possible to combine BIM and Persistent application with OAD profile in single application ?

Potentially, I do not see any problem in this, but for some reason this is not indicated anywhere in TI resources.

Thanks.

over 7 years ago

0 J Lindh over 7 years ago

TI__Guru 57865 points

Hi Vyacheslav,
What are you trying to achieve?

0 Vyacheslav Lebets over 7 years ago in reply to J Lindh

Intellectual 270 points

Hi, Joakim.
Well, first of all, I don't want to have 3 projects (BIM, persist app and app).
Secondly, I just do not see the logic in the fact that BIM would be separate from the persist if they can be combined :).

Reards, Vyacheslav.

0 Tim C over 7 years ago in reply to Vyacheslav Lebets

TI__Mastermind 34660 points

No, this is not possible.

0 Vyacheslav Lebets over 7 years ago in reply to Tim C

Intellectual 270 points

Why ?
Could you explain in more detail?

0 Tim C over 7 years ago in reply to Vyacheslav Lebets

TI__Mastermind 34660 points

Allow me to rephrase: it is not a supported or tested solution. You are free to try it if you desire and it is certainly possible to make it work.

However, I do not see the benefit to doing this.

Bluetooth®︎

Bluetooth forum

CCS/CC1352R: Merging BIM and Persistent application with OAD profile