RTOS/CC2640R2F: cc2640r2f

Jonas828

Part Number: CC2640R2F

Tool/software: TI-RTOS

Hello Community,

I know you guys are genius and I desperately need help. How can I connect cc2640r2f and PMOD GPS and display location parameter in UART? Can anyone tell me step by step?

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735685 points

In your original post, we have shown you roughly how to do it and I think you need to have some hands-on first. After you do some test, you can come back to ask with more specific question.

0 TER over 6 years ago in reply to YiKai Chen

TI__Guru**** 317180 points

We only have code examples on how to use the peripherals available on the chip . We are not able to write step by step examples for every device that could potentially be connected to our chips.

What have you tried so far to get the connection with PMOD GPS up and running ?

0 Jonas828 over 6 years ago in reply to TER

Prodigy 70 points

I am stuck in sensor controller studio as i cannot see any code in execution code file in UART emulator file? How to assign tx and rx pin?

0 YiKai Chen over 6 years ago in reply to Jonas828

Guru 735685 points

I suggest you to study sensor controller section in SimpleLink Academy at dev.ti.com/.../

0 TER over 6 years ago in reply to YiKai Chen

TI__Guru**** 317180 points

Did you check the IO mapping part of the example?

Bluetooth®︎

Bluetooth forum

RTOS/CC2640R2F: cc2640r2f