CCS/CC2650: CC2650

Usman Muhammad

Part Number: CC2650

Tool/software: Code Composer Studio

I want to add a security feature in my sensor tag cc2650 that it can only be connected with my phone. So where i can create a white list of my phone mac address in code composer v8?

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735685 points

Usually, smartphone would use virtual BLE MAC address which might be change anytime and it might not work to add a fix mac address from your smartphone.

0 J Lindh over 6 years ago

TI__Guru 57865 points

Hu Usman,
You need to enable pairing/bonding with the sensortag. Please note that you cannot use the built in Bluetooth functionality in the smartphone, you will need to write your own app for this afaik.

0 Usman Muhammad over 6 years ago in reply to J Lindh

Intellectual 480 points

Lets give a look at below link
e2e.ti.com/.../710054

I have already created an app but where to add my phone mac address in code composer studio to recognize only my phone ?

0 Marie H over 6 years ago in reply to Usman Muhammad

TI__Guru* 81491 points

Hi Usman,

You should check out the Software Developer's Guide (link: http://www.ti.com/lit/swru393 ) and look for White list.

0 Usman Muhammad over 6 years ago in reply to J Lindh

Intellectual 480 points

Can you please elaborate further about bonding.
like how to perform bonding with sensor tag?

0 YiKai Chen over 6 years ago in reply to Usman Muhammad

Guru 735685 points

For pairing and bonding, you can refer to the discussions in e2e.ti.com/.../657797

0 Marie H over 6 years ago in reply to Usman Muhammad

TI__Guru* 81491 points

Hi Usman,

You can read about pairing and bonding and associated APIs in the Software Developer's Guide ( http://www.ti.com/lit/swru393 )

0 Marie H over 6 years ago in reply to Usman Muhammad

TI__Guru* 81491 points

Hi Usman,

Were you able to implement what you wanted?

I will close this thread due to inactivity.

Bluetooth®︎

Bluetooth forum

CCS/CC2650: CC2650