CC2640: POWER_SAVING macro

Qianqian

Part Number: CC2640

Dear TI Experts,

I am using CC2640 and meet with a problem needs your suggestion,

Will the POWER_SAVING macro( a low-power macro) have any impact on the sample code generated by SCS?

We now find that opening POWER_SAVING macro results in abnormal SCS sampling, and after turning the macro off, everything is all right~

over 6 years ago

0 J Lindh over 6 years ago

TI__Guru 57865 points

HI,
Could you please provide some additional feedback on what you have implemented? POWER_SAVING should not have a impact. Also, what SDK version are you using?

0 Qianqian over 6 years ago in reply to J Lindh

Genius 5010 points

Hi Lindh，
My sdk version is ble_cc26xx_2_01_00_44423
I know their is new SDK Vertion now but we can't change it now~~

When I turn on the POWER_SAVING , Touch will be triggered by mistake。
But when I turn off the POWER_SAVING, touch will not be triggered by mistake,everything is all right~

Is it affacted by the PCB layout all other possible reasons? Really need your suggestion~

0 Eirik V over 6 years ago in reply to Qianqian

TI__Guru 56590 points

Which peripherals are you using in the sensor controller?
Are you sharing any GPIO between the sensor controller and the TI-RTOS application?

0 Eirik V over 6 years ago

TI__Guru 56590 points

Any update?

0 Eirik V over 6 years ago in reply to Eirik V

TI__Guru 56590 points

I'm going to close this post for now then. If you have feedback within a few days you can follow up question to reopen this thread.
If it takes longer than please post a new thread by pressing the orange button + Ask a related questions.

Bluetooth®︎

Bluetooth forum

CC2640: POWER_SAVING macro