• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 502 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640R2F: RF test method with CMW500

Cary Wang
Intellectual 580 points
Part Number: CC2640R2F

Dears:

We need to test the RF of Bluetooth module (Based on CC2640R2F) .

Test Instrument isCMW500. We need to use signaling mode for the testing.

Need your help to give the method for the test (H/W CONNECTION, S/W CODE).

Thank you!

  • 0
    TI__Guru** 106705 points
    Hi Cary,

    The TI BLE stacks support Direct Test Mode (DTM) interface and required HCI test commands natively as part of the HostTest network processor project that is supplied within the respective SDK. With this project, HCI command input over UART is enabled by default.

    Regards,
    Fredri