CC2640R2F: RF test method with CMW500

Cary Wang

Intellectual 580 points

Part Number: CC2640R2F

Dears:

We need to test the RF of Bluetooth module (Based on CC2640R2F) .

Test Instrument isCMW500. We need to use signaling mode for the testing.

Need your help to give the method for the test (H/W CONNECTION, S/W CODE).

Thank you!

over 6 years ago

0 Fredrik K over 6 years ago

TI__Guru** 106705 points

Hi Cary,

The TI BLE stacks support Direct Test Mode (DTM) interface and required HCI test commands natively as part of the HostTest network processor project that is supplied within the respective SDK. With this project, HCI command input over UART is enabled by default.

Regards,
Fredri

Bluetooth®︎

Bluetooth forum

CC2640R2F: RF test method with CMW500