RTOS/CC2650: DHT11

Travis Baker

Part Number: CC2650

Tool/software: TI-RTOS

http://e2e.ti.com/support/wireless-connectivity/bluetooth/f/538/t/708411

This post was excellent in helping me implement the DHT11 but I have a couple of simple questions. First, what is skipPulse? where is it defined and how does it work?

Second, is there a corresponding interrupt response function or is skipPulse just looping until the pin changes state?

Thanks so much.

over 6 years ago

0 J Lindh over 6 years ago

TI__Guru 57865 points

Hi Travis,
DHT11 is not a device from Texas Instruments, so we do not have any intel on the device. However, the community might so I'll leave this thread open for a while.

0 Travis Baker over 6 years ago in reply to J Lindh

Prodigy 120 points

Thanks. My question is directed towards the code associated with pin interrupts. The code in this example uses “skipPulse” and I have never seen that. It looks like a really smooth solution but I didn’t know if it existed in a library or if it was a custom function the guy wrote himself.

Thanks again

0 J Lindh over 6 years ago in reply to Travis Baker

TI__Guru 57865 points

Hi Travis,
Sorry for misunderstanding. Nevertheless, I cannot seem to find any documentation on "skipPulse" within our online collateral.

Bluetooth®︎

Bluetooth forum

RTOS/CC2650: DHT11