My customer want to get BLE 4.2 SIG certification using CC2640F128 in May.
For getting certification, the customer must to provide RF-PHY of CC2640F128 information and we have provided an application note (http://www.ti.com/lit/an/swra601/swra601.pdf).
But we need additional information. Please refer below table and let me know what values is.
Thank you.
| RF-PHY:13:1 | Inband Image Frequency (Stable Modulation Receiver) | Low frequency | MHz | RF-PHY/RCV/CA/BV-15-C (C/I and Receiver Selectivity Performance, Stable Modulation Index) | ||
| RF-PHY:13:2 | Middle frequency | MHz | ||||
| RF-PHY:13:3 | High frequency | MHz | ||||
| RF-PHY:14:1 | Value n for Intermodulation test (Stable Modulation Receiver) | Low frequency | Integer | RF-PHY/RCV/CA/BV-17-C (Intermodulation performance, Stable Modulation Index) | ||
| RF-PHY:14:2 | Middle frequency | Integer | ||||
| RF-PHY:14:3 | High frequency | Integer | ||||
| RF-PHY:15:1 | Inband Image Frequency (Stable Modulation Receiver, 2Ms/s) | Low frequency | MHz | RF-PHY/RCV/CA/BV-21-C (C/I and Receiver Selectivity Performance at 2Ms/s, Stable Modulation Index) | ||
| RF-PHY:15:2 | Middle frequency | MHz | ||||
| RF-PHY:15:3 | High frequency | MHz | ||||
| RF-PHY:16:1 | Value n for Intermodulation test (Stable Modulation Receiver, 2Ms/s) | Low frequency | Integer | RF-PHY/RCV/CA/BV-23-C (Intermodulation performance at 2Ms/s, Stable Modulation Index) | ||
| RF-PHY:16:2 | Middle frequency | Integer | ||||
| RF-PHY:16:3 | High frequency | Integer |
