CCS/CC2630: Now the bracelet project also USES 2630, which is the ti-mac system. Now once the RX of the serial port is turned on, it cannot enter the low power consumption

boer.deng

Part Number: CC2630

Tool/software: Code Composer Studio

Now the bracelet project also USES 2630, which is the ti-mac system. Now once the RX of the serial port is turned on, it cannot enter the low power consumption？How to solve this problem?

over 6 years ago

0 Severin Suveren over 6 years ago

TI__Mastermind 23730 points

Hi Boer,

You simply cannot enter standby when you have opened a serial port for TX/RX. You either close the serial port when you are not using it and enter standby afterwards, or you don't close it and suffer from higher current consumption.

0 boer.deng over 6 years ago in reply to Severin Suveren

Expert 1085 points

Do you mean you have to turn off the RX function in low power mode?Otherwise cannot enter low power consumption mode;

0 Severin Suveren over 6 years ago in reply to boer.deng

TI__Mastermind 23730 points

Yes.

Bluetooth®︎

Bluetooth forum

CCS/CC2630: Now the bracelet project also USES 2630, which is the ti-mac system. Now once the RX of the serial port is turned on, it cannot enter the low power consumption