CC2640R2F: The configurable minimum value for High Duty Cycle Non-Connectable Advertising on CC2640R2F

Nomo

Part Number: CC2640R2F
Other Parts Discussed in Thread: BLE-STACK

Hello,

Could you tell me the configurable minimum value for High Duty Cycle Non-Connectable Advertising on CC2640R2F and the way to set?
We refer documentations in the "doc" folder of SDK (v3.10.00.15); however, the procedure to set and the configurable value can be found.

Best Regards,
Nomo

over 6 years ago

0 J Lindh over 6 years ago

TI__Guru 57865 points

Hi Nomo,

The fastest advertising interval is 20ms. Please refer to the SimpleLink Academy (SLA) Modules for interactive tutorial on the topic: http://dev.ti.com/tirex/

0 Nomo over 6 years ago in reply to J Lindh

Guru 16800 points

Hi Joakim-san,

Thank you for your comment.
However, it seems the value is for Bluetooth v4.2 (BLE-Stack).
In case of Bluetooth 5 (BLE5-Stack), is the same value (20ms) configurable?

Best Regards,
Nomo

0 J Lindh over 6 years ago in reply to Nomo

TI__Guru 57865 points

Hi Nomo,

The constraints are the same on Bluetooth 5.

0 Nomo over 6 years ago in reply to J Lindh

Guru 16800 points

Hi Joakim-san,

Thank you for your reply.
I could understand the minimum value on Bluetooth 5 for the advertising is 20ms.

Best Regards,
Nomo

Bluetooth®︎

Bluetooth forum

CC2640R2F: The configurable minimum value for High Duty Cycle Non-Connectable Advertising on CC2640R2F