CC2640R2F: Application scenarios for BLE 5.0 modes

Sara Jia

Part Number: CC2640R2F

Hi Ti Team,

For the latest BLE5.0 SDK, there are three modes as follow, I want to check their application scenarios. and if the first one is general ? In the new SDK, We want to clip long rang mode and high speed mode in the SDK, if it help us save resources, and how much? and how to do it ?Would you pls give us recommendation on it?

over 6 years ago

0 Evan W over 6 years ago

TI__Mastermind 40450 points

Hi Sara,

I've assigned your post internally to someone who will be able to assist further.

At a high level, you can find the differences between the three configurations here:

http://dev.ti.com/tirex/content/simplelink_cc2640r2_sdk_3_10_00_15/docs/blestack/ble_user_guide/html/cc2640/ble-software-architecture.html?highlight=rcosc#project-build-configurations

Depending on your application requirements, it may not be advisable to use BLE5 on CC2640R2F due to flash limitations. If you run into limitations, I would kindly suggest that you look at the CC26x2 device which features hundreds of kb more flash and a lot more RAM.

0 Sarah Latiolais over 6 years ago

TI__Prodigy 430 points

Hi Sara,

We haven’t heard from you for a few days, so we are assuming you were able to resolve your issue. If this isn’t the case, please click the “This did NOT resolve my issue” button and reply to this thread with more information. If this thread locks, please click the “Ask a related question” button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping you solve the issue.

Thanks,

Sarah

Bluetooth®︎

Bluetooth forum

CC2640R2F: Application scenarios for BLE 5.0 modes