CCS/BOOST-CC2564MODA: BoostCC2564MODA EVM + MSP432P demo is not working

Rio Chan

Genius 12830 points

Part Number: BOOST-CC2564MODA
Other Parts Discussed in Thread: CC31XXEMUBOOST

Tool/software: Code Composer Studio

https://www.components-mart.com/datasheets/10/BOOST-CC2564MODA.pdf

Hi.

We have studied the above link.

By using the CCS to build / flash the code onto MSP432.

It won't work.

It will only show us those logs:

OpenStack().

Stack Init Failed: -4.
Unable to open the stack.

So, may you tell us how to solve this?

Do we have re-work the jumper or anything?

What's the SW config to make it work?

BR Rio

over 4 years ago

0 Rio Chan over 4 years ago

TI__Genius 12830 points

Hi .

I also read this:

http://www.ti.com/lit/ug/swru453b/swru453b.pdf

In the section as the below:

4. Move nSHUTD to nS2 on the BOOST-CC2564MODA jumper J5.
5. Add a jumper to TX_DBG on J8.
6. Ensure that J22 and J4 are DNI.
7. Populate J1 and J2.
8. Stack the BOOST-CC2564MODA onto the CC31XXEMUBOOST.
9. Fit the CC31XXEMUBOOST onto the MSP-EXP432P401R LaunchPad development kit.

Can you tell me the

A. Step6, where is the J22 / J4?

B. What is DNI?

C. Where is J1/J2?

D. I'm using the SDK v4.2.1.1, does this SDK working as the PDF saying?

BR Rio

0 Vincent Rodriguez over 4 years ago in reply to Rio Chan

TI__Mastermind 28285 points

Rio,

If you look at figure 4 and 5, there is a pictures of the jumper placements required for the different stack ups. I would suggest following what the jumper placement here.

For the SDK, did you download the latest from here? http://www.ti.com/tool/CC256XMS432BTBLESW

Best Regards,

Vince

0 Vincent Rodriguez over 4 years ago

TI__Mastermind 28285 points

Rio,

Let me know if you have any other questions on this issue. If you have another issue, please create a new thread.

Best Regards,

Vince

Bluetooth®︎

Bluetooth forum

CCS/BOOST-CC2564MODA: BoostCC2564MODA EVM + MSP432P demo is not working