CC2650MODA: cc2650moda

Yash Khant

Part Number: CC2650MODA
Other Parts Discussed in Thread: MSP432E401Y, BLE-STACK, CC2650

I am running interrupt.c source code on cc2650moda booster pack having msp432e401y launch pad. I am working on bluetooth.

But i am getting error in the source code.

Pls help me solve this error[ cortex M3 pin Error_PIN_init]

0 J Lindh over 6 years ago

Hi Yash,

Could you please share the full compile error log?

0 Yash Khant over 6 years ago in reply to J Lindh

This error comes in debug session not in build session

and i am getting this only

0 J Lindh over 6 years ago in reply to Yash Khant

Hi Yash,

Seems like you are trying to run debug while operating the BLE-Stack as a network processor. This will cause conflict on the USB?

0 Yash Khant over 6 years ago in reply to J Lindh

So i should debug with USB connection to MSP432e401y launch pad and plug in cc2650 booster pack on msp via JTAG.

Right?

0 Yash Khant over 6 years ago in reply to J Lindh

Hi Joakim

I am attaching a screen shot of cc2650moda data sheet.

In this system architecture, if i am interpreting it right, BLE can work in two ways:

1. WNP—an IC(cc2650moda booster pack) running the wireless protocol stack, with the application running on a separate MCU (msp432e401y)

2. System-on-Chip (SoC), with the application and protocol stack running on the ARM Cortex-M3 core (cc2650moda booster pack)

So in first case, both cc2650moda booster pack is required and msp432e401y launch pad is required in which i should focus on msp432 for code.

And in second case only cc2650moda booster pack is required.

Correct me if i am wrong.

Regards

Yash

0 J Lindh over 6 years ago in reply to Yash Khant

Hi Yash,

You are correct with your statements.

0 Yash Khant over 6 years ago in reply to J Lindh

thanks

Bluetooth forum