CC2650: hci uart

chaabani houssem

Part Number: CC2650
Other Parts Discussed in Thread: CC2560

we are working with cc2650, and we couldn't find how to control it via hci uart, and we just found that the cc2560 support the hci uart.

is there any firmware or any solution that could help us to use the cc2650 as hci uart ?

if yes, give me the URL to download the firmware.

if there is any other solution, it will be very helpful.

over 6 years ago

0 J Lindh over 6 years ago

TI__Guru 57865 points

Hi Chaabani,

I suppose you mean from an external MCU point of view, please see this:

http://www.ti.com/tool/SIMPLELINK-SDK-BLUETOOTH-PLUGIN

0 chaabani houssem over 6 years ago in reply to J Lindh

Prodigy 20 points

Hi Joakim,

thank you for your response !

i don't want to use a simplelink MSP432P401. i want to direct use my c2650 as hci uart on a linux bord (raspberrypi).

Best regards,
chaabani,

0 J Lindh over 6 years ago in reply to chaabani houssem

TI__Guru 57865 points

Hi,

Unfortunately, we haven't invested in any sample code for that. Please note that the intention of Bluetooth low energy in this context is to run application on the wireless MCU in contrast to an external processor.

Bluetooth®︎

Bluetooth forum

CC2650: hci uart