CC2652R: BER measurement

Hitoshi Sugawara

Part Number: CC2652R

Hi Experts,

Is it possible to measure the BER if any GPIOs are configured the clock out and the data out during continuous receiving the data mode?

Thank you for your kind teaching me.
Best regards,
Hitoshi

over 7 years ago

0 TER over 7 years ago

TI__Guru**** 317180 points

We highly recommend that you measure PER and calculate BER from the PER number. See the equations found here: https://en.wikipedia.org/wiki/Bit_error_rate

In an system you will send packets and the radio is designed to do this. It's not designed to send a random bit stream.

0 Hitoshi Sugawara over 6 years ago in reply to TER

TI__Mastermind 21150 points

Hi TER,

Thank you very much for kind explanation.
Will follow it.

Best regards,
Hitoshi

Bluetooth®︎

Bluetooth forum

CC2652R: BER measurement