CC2541EMK: CC2541EMK

greg sutton

Part Number: CC2541EMK
Other Parts Discussed in Thread: CC2541

I am using an CC2541EMK with a SmartRF05 board and using SmartRF Studio 7. I want to measure the TX signal with a VSA, is there a way to turn the frequency hopping off? I don't see any registers.

thanks

over 5 years ago

0 TER over 5 years ago

TI__Guru**** 317180 points

When controlling a CC2541 with SmartRF Studio, frequency hopping is not used.

- What type of signal do you want to measure (modulated, not modulated, packets or not)

- Why do you think you have frequency hopping?

- Please post a screenshot of how you use Studio today

0 YiKai Chen over 5 years ago

Guru 735515 points

You can fix channel when you test CC2541EMK with SmartRF Studio 7.

0 greg sutton over 5 years ago

Prodigy 110 points

Is there a way to turn off frequency hopping?

thanks

0 TER over 5 years ago in reply to greg sutton

TI__Guru**** 317180 points

When controlling a CC2541 with SmartRF Studio, frequency hopping is not used.

- Why do you think you have frequency hopping?

0 TER over 5 years ago in reply to TER

TI__Guru**** 317180 points

Any update?

0 greg sutton over 5 years ago in reply to TER

Prodigy 110 points

Connecting the transmit board to a VSA shows freq hopping. So I guess if the TX is not connected to the RXer, it will freq hop trying to make a connection.

0 TER over 5 years ago in reply to greg sutton

TI__Guru**** 317180 points

SmartRF studio does not do frequency hopping. Why do you believe that what you see on the VNA is hopping?

0 greg sutton over 5 years ago in reply to TER

Prodigy 110 points

With the TX board connected to a VSA, I can definitely see the signal is freq hopping.

0 TER over 5 years ago in reply to greg sutton

TI__Guru**** 317180 points

Do you have a screenshot showing this and a screenshot of how you set up SmartRF Studio for this measurement?

Bluetooth®︎

Bluetooth forum

CC2541EMK: CC2541EMK