CC2540: Need USB dongle firmware for CC2540

Guido Sauer

Part Number: CC2540
Other Parts Discussed in Thread: BLE-STACK

Hello!

for my USB Stick CC2540 I need a USB dongle firmware.

Unfortunately the link in this thread

does not work.

Thank you!

0 Vetle S over 5 years ago

Hei Guido,

Can you be more specific in what you are looking for? What link in particular is not working, and what would you expect to get out of it?

Best regards,

Vetle

0 Guido Sauer over 5 years ago in reply to Vetle S

Hi Vetle

Well this link does not work:

I will put a CC2540 USB Stick on a Raspberry Pi instead of the internal Bluetooth, so I need a *.hex file to flash it by the CC debugger.

Best Regards

Guido

0 Eirik V over 5 years ago in reply to Guido Sauer

Hello Guido,

You will find the CC2540 USB sniffer firmware for use with packet sniffer in this folder after you install http://www.ti.com/tool/PACKET-SNIFFER:

C:\Program Files (x86)\Texas Instruments\SmartRF Tools\Packet Sniffer\bin\general\firmware

2) If you want to use it with BTool you can load this hex file from the BLE-STACK( http://ti.com/ble-stack):

C:\Texas Instruments\BLE-CC254x-1.5.0.16\Accessories\HexFiles\CC2540_USBdongle_HostTestRelease_All.hex

Bluetooth forum