• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 277 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC2640R2: Emulate BTN-1 press by DIO13

Toru Ishihara
Prodigy 100 points

Part Number: LAUNCHXL-CC2640R2
Other Parts Discussed in Thread: CC2640

I am working on aoa_sender demo.  But I have to press BTN-1 manually.

I like use DIO13 as BTN-1 for automation.

I like to make sure my these understanding is correct.

- If I connect DIO13 to 5V, it is same as BTN-1 pressed.

- If I disconnect DIO13 from 5V, it is same as BTN-1 released.

If you have circuit on BTN-1, please let me know.