• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 162 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

RTOS/TIDA-010024: CC1312/ UART1 Pins and Debug Error

CCS/CC2640R2F: programming problem

harish kumar
Prodigy 160 points

Part Number: CC2640R2F
Other Parts Discussed in Thread: CCSTUDIO

Tool/software: Code Composer Studio

Hi Sir/Madam,

 I have cc2640r2f bluetooth module i dont have xds100 debugger how can i flash the program in the cc2640r2f chip.

and one more doubt is without using CCStudio how can i run the sdk file please let me know

  • 0
    TI__Guru* 83731 points

    Hi Harish,

    You will need a debugger to program the device. You can buy a third-party debugger or use the debugger on a CC2640R2F LaunchPad. (Or if you have any other launchpads available.)

    I don't understand your second question. If you are not sure how to import SDK projects into CCS, please see the BLE Fundamentals lab: