CC2640R2F: CC2640 continue TX power

Tonny

Prodigy 70 points

Part Number: CC2640R2F
Other Parts Discussed in Thread: CC2640

Hi Sir,

Due to we need to measure CC2640 TX power, have any UART command or test utility able to do that?

Thanks.

over 5 years ago

0 TER over 5 years ago

TI__Guru**** 317180 points

The best tool for this is SmartRF Studio (http://www.ti.com/tool/SMARTRFTM-STUDIO). With this program you can set the chip in cont. tx which enables you to do the test.

0 Tonny over 5 years ago in reply to TER

Prodigy 70 points

Thanks, I got it already but it look like used for chip only. Forgot to mention my question is want to test the continue TX power on CC2640 products.

0 TER over 5 years ago in reply to Tonny

TI__Guru**** 317180 points

If you have a jtag connector on a board, you can use SmartRF Studio to set the CC2640 in TX and then your product is in TX.

0 Tonny over 5 years ago in reply to TER

Prodigy 70 points

Thanks, I will download SmartRF tool to test it via JTAG.

Bluetooth®︎

Bluetooth forum

CC2640R2F: CC2640 continue TX power