• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 221 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/CC2640R2F: Project 0 error statement

pradeep sambu
Intellectual 420 points

Part Number: CC2640R2F

Tool/software: Code Composer Studio

Hello Ti,

I have been working on a demo model project 0. I see an error after clicking the cc2640r2f icon in project 0 documentation. I have disconnected several times but still see the same error please let me know if I need to follow any other step.here is the link I followed

https://dev.ti.com/tirex/explore/node?node=AJ7jWuST9RweXKhWHqlyWg__FUz-xrs__LATEST&search=project0

  • 0
    TI__Mastermind 44190 points

    Hello!

    I am able to click the link you have provided and view it on my computer. It seems you also attempted to upload an image to your post. Is this correct? Can you reply to this post with the image you attempted to upload? Are you getting an error when attempting to open the link?

    I hope to hear from you soon!

    Regards,

    Jan

  • 0 in reply to Jan
    Intellectual 420 points

    Yes, I am able to access the file. Now it shows the location is changed or server is down.

    But the error I have mentioned was this:

    Error Downloading program: Please unplug CC2640R2F and plug it back and try again. Though I did it couple of times it still says the same error message

  • 0 in reply to pradeep sambu
    TI__Mastermind 44190 points

    Hello!

    I see. To be clear, are you trying to download the Project Zero program to run it on your local board?  If so, I suggest following the Bluetooth Low Energy Fundamentals lab on the SimpleLink Academy. It walks your through how to get Project Zero downloaded properly and running on your board. Please let me know if you have any further questions!

    Regards,

    Jan