CCS/LAUNCHXL-CC2640R2: Cannot find any examples to start using BoostXL-AOA

Riju S

Tool/software: Code Composer Studio

Hello,

I am trying to use a BOOSTXL-AOA expansion with my CC2640R2 development board and am unable to find any example code or sections in the documentation on how to get started with it.

The aoa_receiver example project referenced here

over 5 years ago

0 Elin W over 5 years ago

TI__Genius 14845 points

Hi Riju,

Assigning an expert to comment.

Thanks,
Elin

0 Clément over 5 years ago

TI__Guru** 101460 points

Hello Riju,

TI has made the decision to discontinue further development and support of the TI-proprietary Angle of Arrival (AoA) on the CC2640R2. We recommend and welcome our customers using AoA on CC2640R2 to transition from the CC2640R2 to the new RTLS examples based on the Bluetooth 5.1 specification which can be used with the CC13x2R and CC26x2R devices. These software examples can be found in the SimpleLink™ CC13x2 and CC26x2 software development kit 3.40 or later which features a Bluetooth 5.1 qualified stack with support of Bluetooth 5.1 Angle of Arrival. To make this transition, here is a list of available resources you can reference: Simple Link Academy, AoA stack users guide, LaunchPad Tool Order Page

If you have any questions about moving to the Bluetooth 5.1 AoA solution or any questions about the solution itself, please post to E2E!

Best regards,

Bluetooth®︎

Bluetooth forum

CCS/LAUNCHXL-CC2640R2: Cannot find any examples to start using BoostXL-AOA