CC2640R2F: get primary MAC address

Dudi Varshavski

Prodigy 110 points

Part Number: CC2640R2F
Other Parts Discussed in Thread: CC2640, FLASH-PROGRAMMER, UNIFLASH

I would like to read the device MAC address using the programmer, like the Smart-flash 2 programmer

I read there are source code and DLL for QT but i don't find them. Where can i find such.

I would like to program CC2640 device and also read it's MAC address.

Regards,

Dudi

over 5 years ago

0 YiKai Chen over 5 years ago

Guru 735695 points

The alternative is to call Flash Programmer 2 CLI command from your QT application to do this.

0 Dudi Varshavski over 5 years ago in reply to YiKai Chen

Prodigy 110 points

I am not intended to use QT application, i intend to use visual studio windows form and looking for dll to use.

I asked about the QT if you have example code for that, since it developed by QT.

What is the recommended way to read the MAC using JTAG and the programmer, CLI or DLL?

If CLI, you mean to use srfprog.exe?

Regards,

Dudi

0 Ryan Brown1 over 5 years ago in reply to Dudi Varshavski

TI__Guru**** 221437 points

Hi Dudi,

YK is referring to the Command Line Interface which is described in Chapter 6 of the FLASH-PROGRAMMER User's Manual: https://www.ti.com/lit/swru069

It seems you've already found the dll files in C:\Program Files (x86)\Texas Instruments\SmartRF Tools\Flash Programmer 2\bin. The Qt 5.7.0 source and libraries are also available from the Tool page. https://www.ti.com/lit/zip/swrc328

Note that UNIFLASH can accomplish the same functionality: http://downloads.ti.com/ccs/esd/uniflash/docs/latest_qsguide.html

Regards,
Ryan

Bluetooth®︎

Bluetooth forum

CC2640R2F: get primary MAC address