CCS/CC2640R2L: Suggest Low Cost Debugger

HARANATH VASAM1

Part Number: CC2640R2L
Other Parts Discussed in Thread: CC2650

Tool/software: Code Composer Studio

Sir/Madam,

Planning to use CC2640R2L in one of our new designs. May I know low cost debugger for CCS IDE. In the below thread it has been mentioned that Low cost debugger cost only 15$, can you please indicate part number?

e2e.ti.com/.../1486886

Thanks in Advance

HARANATH

over 4 years ago

0 Toby over 4 years ago

TI__Mastermind 32580 points

Hi,

That post is talking about the CC26xx sensor tag (which I believe has the CC2650). This form factor required an external debugger, which is likely referring to this: https://www.ti.com/tool/CC-DEVPACK-DEBUG

Since you wish to develop on CC2640R2L, I would recommend starting with the CC2640R2F launchpads, which includes an on-board debugger that can interface with CCS. You can find the SDK here: https://www.ti.com/tool/SIMPLELINK-CC2640R2-SDK

I have notified the BLE team in case you have further questions, so they can provide more insight.

Regards,
Toby

0 HARANATH VASAM1 over 4 years ago in reply to Toby

Intellectual 300 points

Hi Toby,

Thanks for the quick reply. Yes I am planning to buy CC2640R2F launchpads. However would like to know standalone debuggers for CC2640R2L MCU. We have XDS100 V2.1 , will this support CC2640R2L?

Thanks

HARANATH

0 Alexis Crandall20 over 4 years ago in reply to HARANATH VASAM1

TI__Genius 15590 points

Hi Haranath,

No the XDS100 doesn't support the CC2640R2L.

The supported debuggers are:
- XDS100v3
- XDS110
- XDS200
- Segger JLink

Thanks,

Alexis

0 HARANATH VASAM1 over 4 years ago in reply to Alexis Crandall20

Intellectual 300 points

Hi Alexis,

Thank you very much

HARANATH

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Bluetooth®︎

Bluetooth forum

CCS/CC2640R2L: Suggest Low Cost Debugger