CC2642R: Want to scan and display every Bluetooth devices in coverage area.

ladawan klinkusoom

Part Number: CC2642R

Hello! I am a newby here and I have one CC2642R1/CC2652R1 with AOA antenna on top.

To start my experiment as a master mode, I want to make my board scan and display every Bluetooth devices in coverage area not only TI board (on RTLS UI or COM PORT).

Thank you.

over 5 years ago

0 Luis M over 5 years ago

TI__Expert 5345 points

Hello Ladawan,

Thanks for reaching out. I'll assign someone who will give you a recommendation on how to achieve this.

In the meantime, please checkout our SimpleLink Academy.

-Luis

0 Alec May over 5 years ago in reply to Luis M

TI__Genius 17265 points

Hi Ladawan,

So just to clarify, how would you like to view these devices that you find? Are you looking to display them on the RTLS UI?

Best Regards,
Alec

0 ladawan klinkusoom over 5 years ago in reply to Alec May

Prodigy 170 points

Not really, I want to display other Bluetooth devices on Tera (comport)

0 Alec May over 5 years ago in reply to ladawan klinkusoom

TI__Genius 17265 points

Hi Ladawan,

In that case, I would recommend you first look at our Simple_Central example, since it will display the devices that it scans on a menu in the com port by default. Let me know if you have any questions.

Best Regards,
Alec

0 ladawan klinkusoom over 5 years ago in reply to Alec May

Prodigy 170 points

Can you share me the link of Simple_central

Thanks

0 Alec May over 5 years ago in reply to ladawan klinkusoom

TI__Genius 17265 points

Hi Ladawan,

This example should already be included in your SDK, but I will include the link to its page in the TI resource explorer below. If you have any further questions, let me know.

https://dev.ti.com/tirex/explore/node?node=AEOBs6N.pvG075Y.UTywzw__pTTHBmu__LATEST

Best Regards,
Alec

Bluetooth®︎

Bluetooth forum

CC2642R: Want to scan and display every Bluetooth devices in coverage area.