CC2640R2L: Multiple Roles (peripheral and central)

Furkan Fehmi Sefiloglu

Part Number: CC2640R2L

Hi Team,

This is customer request, can you please advise:

In one of our projects, we are planning to switch to CC2640R2, but we need to run the Bluetooth integrated circuit in multiple roles (peripheral and central). Frankly, although it is written in a few places, I could not be sure about it. If we can run it in this mode, we will switch directly to this integrated. I request your support on the subject.

Thanks in advance

Furkan Sefiloglu

over 5 years ago

0 Ammar N over 5 years ago

TI__Mastermind 25810 points

Hey Furkan,

If the customer is using the BLE stack (not BLE5), then we have a multi_role example in our SDK that does both peripheral and central roles. I would suggest starting there. Here's a link to the example on Simplelink Academy: dev.ti.com/.../node

0 icelik over 5 years ago in reply to Ammar N

Prodigy 100 points

Hi Ammar Thank you for information. I have one more question, I can use multiple role ok but, can i use multiple role and ota at same stack(my application has small footprint)?

0 Ammar N over 5 years ago in reply to icelik

TI__Mastermind 25810 points

Yes, here's a link to our Simplelink Academy Module where we walkthrough adding OAD support to the multi-role example :)

dev.ti.com/.../node

0 icelik over 5 years ago in reply to Ammar N

Prodigy 100 points

Thanks Ammar it ok for me.

Bluetooth®︎

Bluetooth forum

CC2640R2L: Multiple Roles (peripheral and central)