LAUNCHXL-CC2640R2: Dongle equivalent

Art Mecina

Part Number: LAUNCHXL-CC2640R2
Other Parts Discussed in Thread: CC2540EMK-USB,

Hello Guys,

Good day.

A customer of ours is looking to replace CC2540EMK-USB with a module that utilizes the CC26xx series chips. It looks like the LAUNCHXL-CC2640R2 will suite his purposes but it is not a dongle. Do you have any suitable replacements that are also a USB dongle?

Thanks in advance!

Art

over 5 years ago

0 Markel Robregado over 5 years ago

Guru 86865 points

Hi,

Just doing a quick search in the net see, below.

-kel

0 YiKai Chen over 5 years ago

Guru 735705 points

Try to refer to electrolama.com/.../

0 Nathan Block over 5 years ago

TI__Mastermind 38575 points

I think either of the solutions posted below will work. Closing the thread out.

0 Art Mecina over 5 years ago in reply to Nathan Block

TI__Genius 16925 points

Hi Nathan,

Do you think these products are able to be flashed with TI Host Test Firmware and be interfaced with through bTool?

Thanks!

Art

0 Nathan Block over 5 years ago in reply to Art Mecina

TI__Mastermind 38575 points

I don't see why not. Both the boards linked have JTAG pins on them, which could connect to the XDS on a Launchpad, which would then connect to a computer for those applications.

0 fredrikgk over 5 years ago in reply to Art Mecina

Expert 2170 points

The Electrolama dongle uses the default UART pins and should work directly BTool without any changes to HostTest.

Bluetooth®︎

Bluetooth forum

LAUNCHXL-CC2640R2: Dongle equivalent